Feedthrough Insulators
Isores Insulators
Isores insulators are suitable for indoor installation. They are manufactured from epoxy resin by the injection pressure gelation process. The high dielectric performance is achieved by casting under vacuum. All insulators are cast with sheds increasing voltage insulation and allowing installation of insulators in polluted environments. Brass inserts are cast in the top and bottom of the insulator body.
Isores feedthrough insulators are manufactured according to IEC137-1984.
| Part Number | Rated Volts kV |
Rated Current A |
A | B | C | D | E | G | H | L | M | N | S | T | Creep mm |
Mass kg |
| IPN10/0250 | 12 | 250 | 150 | 130 | 280 | 40 | 65 | 95 | 72 | 70 | 380 | 50 | 12 | 12x1.5 | 195 | 1.800 |
| IPN10/0400 | 12 | 400 | 150 | 130 | 280 | 40 | 65 | 95 | 72 | 70 | 380 | 50 | 16 | 16x1.5 | 195 | 2.000 |
| IPN10/1000 | 12 | 1000 | 150 | 130 | 280 | 55 | 80 | 105 | 87 | 80 | 400 | 60 | 30 | 24x2.0 | 195 | 4.600 |
| IPN10/1250 | 12 | 1250 | 150 | 130 | 280 | 80 | 105 | 120 | 112 | 95 | 440 | 80 | 36 | 36x2.0 | 195 | 7.200 |
| IPN20/0250 | 24 | 250 | 245 | 245 | 490 | 40 | 70 | 105 | 87 | 80 | 590 | 50 | 12 | 12x1.5 | 400 | 3.400 |
