E. C. Menzies Electrical Pty Ltd     

Products
Fabrication
News

Home Contents Search Feedback

Silicone Rubber Leadwire with Fibreglass Jacket Conductor

Type 4253

Type 4253 Silicone Rubber Leadwire consists of stranded, tinned copper conductors, insulated with extruded silicone rubber.  The extrusion is covered with a high temperature impregnated fibreglass braid.  The product is UL, CSA labelled at 200șC, 600 Volt, and is flame resistant.  It also meets the requirements of MIL-W-16878D, type FF 200șC, 1000 Volt.

 

Table 1 - Leadwire Dimensions.
Part Number Conductor
Stranding
strands/dia
mm		 Area
mm2		 AWG Insulation
thickness
mm		 Conductor
O.D.
mm		 Cable
O.D.
mm
CASRG022 133/0.45 22 4 1.6 6.8 10.6
CASRG033 259/0.40 33 2 1.6 8.5 12.4
CASRG042 259/0.45 42 1 2.0 9.6 15.1
CASRG053 259/0.51 53 1/0 2.0 10.8 16.3
CASRG066 259/0.57 66 2/0 2.0 12.1 17.6
CASRG084 259/0.64 84 3/0 2.0 13.5 19.1
CASRG106 259/0.72 106 4/0 2.0 15.3 20.8

 

Table 2 - Leadwire Current Carrying Capacity.
Part Number Conductor
Stranding
strands/dia
mm		 Area
mm2		 Amps Per Conductor
Number of Conductors
1 2-3 4-6
CASRG022 133/0.45 22 180 120 96
CASRG033 259/0.40 33 240 165 132
CASRG042 259/0.45 42 280 190 152
CASRG053 259/0.51 53 325 225 180
CASRG066 259/0.57 66 370 250 200
CASRG084 259/0.64 84 430 285 228
CASRG106 259/0.72 106 510 340 272

 

 

Copyright © 1999 E. C. Menzies Electrical Pty Ltd
Use of this site indicates you accept the Terms of Use
Contact us by email at Sales, or for web site issues contact Web Master
Last modified: June 29, 2001